Aladdin EasyFit Isolator - Starter (includes Tools)

The Aladdin® EasyFit Isolator clamps around a 15mm copper or plastic pipe and allows an isolation valve to be installed quickly and easily, providing a permanent stop-cock in the system.

The installer can use his battery drill (along with the EasyFit Isolator Tool Kit – EIT) to fit an isolator directly into hot, or cold, pressurised pipe-work without need for closing off the main external or internal service valve. Rapid installation time of under 5 minutes.

Safe to use on mains potable water supplies, the valve received WRAS approval. Manufactured in stainless steel body with brass core and large visible red handle.

Some uses of the Aladdin EasyFit Isolator:

• As an emergency fitting, where the stop-cock is inaccessible or will not work.
• As a convenience device in multi-occupancy buildings (e.g. hotels, shops and HMOs) where water supply to one area needs to be worked on without inconveniencing other occupants.
• As a time-saving (and therefore cost-saving) fitting, avoiding the time-wasting delays associated with freezing or draining-down
• As a “Green” alternative, particularly to gas-freezing.
• To provide the home-owner with an accessible emergency shut-off valve

Please note that this unit needs to be installed with the EasyFit Isolator Toolkit (CODE EIT)

	Copper BS EN 1057 (type L & M) 0.7 wall thickness	Copper BS EN 1057 (type K) 1.0 wall thickness	Plastic (BS 7291): PEX, Polybutylene HeP2O
Max Operating Pressure	10 bar	10 bar	6 bar
Max Operating Temperature	85 deg. C	85 deg. C	82 deg. C
Manufacturers Warranty	10 yr	10 yr	5 yr
Pipe Size	15mm	15mm	15mm
Pipe Cutting Force	16 Nm	30 Nm	10 Nm

Don’t forget once you have purchased and received your Aladdin EasyFit Isolator leave a "Customer Review" and share your thoughts with others.

Technical Specifications

Manufacturer Part Number

EZF03